Hot-work steels
Logically speaking, selecting the best materials requires outstanding experience and specific expert knowledge, both of which Friedr. Lohmann GmbH has gained over the course of two centuries.
The cutting materials and tools made of high-speed steel play a dominant role in the metalworking industry in particular.
High-speed steel is characterized by high wear resistance, a high processing hardness, adequate toughness, high resistance to tempering, and high red hardness, and can withstand operating temperatures of up to 600 °C. They are used primarily in tools used in machining or cutting processes.
Warmarbeitsstahl Hot Work Steel | |||||||||||||||||
Werksmarke Brand Name | Werkstoff Mat.-No. | AISI/BS -type | Richtanalyse % Typical Analysis % | Glühhärte Annealed/hardness | Härten Hardening | Härte in HRC nach dem Anlassen in °C Hardness in HRC after tempering °C | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Datenblatt Data Sheet | (Ident.No.) | C | Si | Mn | Cr | Mo | V | W | Co | Ni | HB max. | °C | °C | HRC | |||
LO-W 2343 | 1.2343 | H-11 | 0,38 | 1,0 | 5,3 | 1,4 | 0,4 | 229 | 1020 | 550 - 620 | 46 - 52 | ||||||
LO-W 2344 | 1.2344 | H-13 | 0,4 | 1,0 | 5,3 | 1,4 | 1,0 | 229 | 1020 | 550 - 620 | 46 - 52 | ||||||
LO-W 2345 | 1.2345 | 0,5 | 1,0 | 0,3 | 5,0 | 1,3 | 0,9 | 229 | 1040 | 500 - 550 | 54 - 58 | ||||||
LO-W 2365 | 1.2365 | H-10 | 0,32 | 3,0 | 2,8 | 0,5 | 229 | 1040 | 540 - 620 | 44 - 50 | |||||||
LO-W 2367 | 1.2367 | 0,38 | 0,4 | 5,0 | 3,0 | 0,5 | 229 | 1040 | 600 - 640 | 44 - 52 | |||||||
LO-W 2885 | 1.2885 | H-10A | 0,32 | 3,0 | 2,8 | 0,5 | 2,8 | 229 | 1020 | 580 - 620 | 46 - 50 | ||||||
LO-W 2888 | 1.2888 | 0,2 | 0,2 | 0,5 | 9,5 | 2,0 | 5,5 | 10,0 | 340 | 1140 | 600 - 730 | 42 - 54 | |||||
Werkzeugstahl (Kalt / Warm / Rostbeständig – auf Wunsch in ESU-Ausführung) Tool Steel (Cold Work/ Hot Work / Martensitic Stainless Steel – in ESR-production on demand) | ||
Form / Form | Abmessung/ Sizes | Ausführung (geschmiedet, geglüht) / Execution (forged, annealed) |
---|---|---|
40 - 400 mm | Alternativ geschält bzw. überdreht mit Plustol / resp. peeled or turned with plustol. | |
80 x 20 - 600 x 200 mm | Gestrahlt, alternativ bearbeitet / shot-blasted, resp. premachined | |
40 x 40 - 400 x 400 mm | Gestrahlt, alternativ bearbeitet / shot-blasted, resp. premachined. |
Delivery form:
Custom production is available on customer request:
Warehouse:
In our main warehouse, we have a supply of special alloys in various sizes as well alloys in standard qualities.